Pneumatic Vertical Shock Response Spectrum Test System Can
Withstand 1000kg Load
Product description:
GSKA14 series pneumatic shock response spectrum tester is used to
measure and determine the shock resistance of electrical and
electronic products or packaging, and to evaluate the reliability
and structural integrity of the test product in a shock
environment. The shock response spectrum is the total result of a
series of single-degree-of-freedom linear systems with different
natural frequencies subjected to the same shock excitation
response. When a product is subjected to an impact, the maximum
value of its impact response means that the product has a maximum
stress. Therefore, the shock response spectrum tester can better
simulate the shock wave and shock energy suffered in the real
environment.
1200mm table size withstand 1000kg load.
Windows-based stable control system, full-automatic remote-control
interface.
The control & measurement system has built-in SRS specifications
and tolerances, which is convenient for users to adjust and apply.
It automatically completes the test and generates reports.
Adjust the driving shock energy by adjusting the air pressure,
which is convenient to operate and high in efficiency.
The equipment takes up a small area and is easy to install.
Technical Specifications:
Model Parameters | GSKA－20 | GSKA－50 | GSKA－100 | GSKA－200 | GSKA－500 | GSKA－1000 |
| Load (kg) | 20 | 50 | 100 | 200 | 500 | 1000 |
| Table Size(mm) | 300×300 | 500×500 | 600×600 | 800×800 | 1000×1000 | 1200×1200 |
Response Frequency Range (Hz) | 10～10000 |
Max. Response Acceleration (g) | 100000 | 60000 | 50000 | 30000 | 20000 | 10000 |
| Gradient of Rising Stage (dB/Otc) | 6～9 |
Tolerance Range (dB) | ±6～9 |
Overall Dimension (mm) | 1300×
850×
1500 | 1400×
1000×
1500 | 1500×
1100×
1600 | 1700×
1200×
1700 | 1900×
1300×
1800 | 2200×
1500×
2000 |
| Power | AC220V ± 10%,50Hz |
Air Source | ≤1MPa |
| Weight (kg) | 2000 | 2500 | 3500 | 3800 | 4500 | 9000 |
| Working Environment | Temperature range 0 ~ 40℃; Humidity ≤ 80% non-condense |
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
