Computer Connected Material Tensile Testing Machine 2,5,10,20,50,Kg
Introduction:
This machine can test various materials (both finished and
semi-finished products ) of tensile strength ,compressive strength
and elongation ,can do stripping ,tear strength ,flexural
,compression test and etc. It can connect up to the computer and
display or printout the test times , test value , max. value , etc
. Also it can make various report forms according to the
requirements .
The testing machine is widely used in all kinds of hardware, metal,
rubber and plastics, footwear, leather, clothing, textiles,
insulators, wires, cables, terminals and other types of materials,
testing, tensile, tear, peel,compression, bending, shear,
three-point bending ... and other physical test performance.
Product Features:
1. Servo Motor Control
2. The machine includes a thermal printer, which can automatically
output the test results;
3. Units can be switched arbitrarily: Strength: kN/N/kgf/gf/t/lbf;
4. Displacement: mm/cm/in;
5. Automatic homing function;
6. The overload protection function can be set;
7. Various test methods such as fixed load and positioning
displacement.
8. The height and angle of the control screen are adjustable, which
can better match the usage habits of various groups of people.
| Capacity selection | 10,20,50,100,200,300kg optional |
| Display | Touch screen display |
| Force measurement accuracy | better than ±1.0% |
| Force resolution | 1/10,000 |
| Effective force range | 1~100%F.S |
| Displacement resolution | 0.001mm |
| Displacement indication accuracy | better than ±1.0% |
| The test speed range | 100~500mm/min,can be adjusted arbitrarily |
| The maximum test stroke | up to 600mm, excluding clamps |
| Effective test space | 120mm front and rear |
| Force unit switching | kgf,gf ,N,kN,Ibf |
| Stress unit switching | MPa,kPa,kgf/cm2,Ibf/in2 |
| Deformation unit switching | mm,cm,in |
| Stop mode | Upper and lower limit safety setting, emergency stop button, test
piece damage detection |
| Size | 50×50×160cm(W×D×H) |
| Weight | About 75kg |
| Power | High-quality stepper motor/servo motor |
| Power supply | AC220V,50/60Hz,10A or specified |
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
We will produce the machines according to confirmed PO
requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again
with the machine. Then do own factory calibration or third party
calibration(as customer requirements). Check and test all the
details and then arrange packing.
Deliver the products in confirmed shipping time and inform
customer.
