220/380V Walk-In High And Low Temperature (Wet And Hot) Laboratory
OEM
Description:
The walk-in environmental laboratory is divided into (walk-in
constant temperature and humidity laboratory, walk-in high and low
temperature (humid heat) laboratory, walk-in aging room), which
provides large parts, semi-finished products, finished products,
temperature and humidity for the industry Environmental testing,
such as: computer terminals, auto parts and furniture, electronic
and electrical products, toys, batteries, displays, automotive
electronics, power supplies, motherboards, monitors, exchange
chargers and other products for constant humidity and heat in
batches, suitable for It is suitable for testing equipment with a
large number of products and large volume.
Feature:
1. The material of the library board is made of stainless steel and
steel plate baking varnish, which has a strong structure,
waterproof and beautiful appearance. The internal volume can be
enlarged arbitrarily, easy to disassemble and assemble, and can be
designed according to customer needs
2. LCD touch screen controller, display in Chinese and English,
easy to operate.
3. The original imported compressor uses environmentally friendly
refrigerant, and the refrigeration system adopts a binary
low-temperature loop system design to increase the service life of
the equipment.
4. Utilize the powerful air circulation system of the Doji-type
blower to avoid any dead angles and make the indoor temperature and
humidity evenly distributed.
5. With multiple expansion functions:
The control system is connected to the computer via the RS-232
interface, and the user can set programs on the computer screen,
collect test data and records, call program execution, and remotely
control machine switches and other functions. Specially designed
low humidity dehumidification device, the lowest condition can reach
5ºC~5%RH. A temperature and humidity recorder can be added to
provide the actual temperature record curve.
6. Complete safety protection device:
When an abnormal situation occurs, the controller screen
automatically displays the fault status, cuts off the power switch,
and provides troubleshooting methods.
Specifications:
| Inner chamber size w×h×d(cm) | Non-standard,depends on customers` specific requirements for
customization |
| Exterior chamber size w×h×d(cm) |
| Testing temperature range | 0℃,-20℃,-40℃,-60℃,+70℃,+80℃ |
| Performance | Temp.fluctuation | ±0.3℃ |
| humidity range | 30~90%RH |
| Humidity uniformity | ±5℃%RH |
| Temp.uniformity | ±3℃ |
| Heat up time | 20℃~80℃≤50min |
| Material | Exterior chamber material | Cold-rolled steel+Powder coating |
| Interior chamber material | SUS#304 Stainless steel plate |
| Insulation material | PU fiberglass wool |
| System | Air circulation system | Cooling fan |
| Heating system | SUS#Stainless steel high-speed heater |
| Humidification system | Surface evaporation system |
| Controlling system | Digital electronic indicator+SSR+PID |
| Refrigeration system | Imported tecumseh compressor+ fin type evaporator+air(water)condenser |
|
| Dehumidifying system | ADP dew point dehumidification method |
| Other components | Multi-layer vacuum glass observation window,cable
port(50mm),controlling status indicator lamp,chamber
light,specimenloading shelf(2pcs,position adjustable) |
|
| Safety protection device | Over-heat protection circuit breaker,compressor overload
protection,control system overload protection,humidifying system
overload protection indicator lamp |
|
| Power supply | AC 3phase 380V 60/50Hz |
| Customization service | Non-standard or special requirements are all welcome
|
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
