Electronic Climate Ambient Temperature And Humidity Test Chamber
OEM
Features:
1. Reasonable structural design, rapid cooling rate.
2. Imported refrigeration system, internal with SUS#304 high
temperature resistant stainless steel.
3. More than 30% energy saving is achieved.
4. The test specimen can be easily observed via observation window,
5. Easy to Operate, install and maintain.
6. ational Construction and fast cooling rate
7. Frequency conversion control of wind speed.
8. Adopts international brand of imported parts for cooling system
to improve operation reliability
9. Touch screen controller, friendly Man-Machine interface and
safety device to ensure simple operation and easy maintenance.
10. Standards Implemented and met
11. GB10592-89 Technical requirements for high and low temperature
test chamber
12. GB2423.1-1989 Low temperature test
13. GB2423.2-1989 High temperature test mode
Standard:
GB/Bb T2423.2-89 high temperature test method GB2423.1-89 test A:
low temperature test method 6
Ab IEC60068-2-1 low temperature test method GJB150.4-1986 test at
low temperature
EIA - 364-59 test at low temperature IEC60068-2-38 temperature
cycle
IEC60068-2-78 constant temperature IEC60068-2-30 temperature cycle
EIA - 364-31C temp resistance GB/T2423.3 constant heat test method
Specification:
Inner size
W*H*DCM | 40*50*40 | 50*60*50 | 50*75*60 | 60*85*80 | 100*100*800 | 100*100*100 |
| External size W*H*DCM | 90*143*100 | 100*153*110 | 110*168*110 | 130*178*120 | 150*193*140 | 150*193*160 |
| Temperature range | -70°C~+150°C(180°C)
(A:-20°C B:-40°C C:-60°C D:-70°C ) |
| Humidity range | 20%~98%R.H.(10%-98%R.H/5%~98%R.H) |
Temp humidity
analytic accuracy
/ uniformity | ±0.1°C;±0.1%R.H./ ±1.0°C;±3.0%R.H.is special optional condition. |
Temperature humidity
control accuracy/fluctuation | ±1.0°C;±2.0%R.H./ ±0.5°C;±2.0%R.H. |
| Heat/cooling time | About 5.0°C/min;about 1.2°C/min (5~20°C/min is a special optional
condition) |
| Inner and outer materials | SUS#304 Stainless steel for inner chamber and Carton Advanced cold
plate nano paint for outer. |
| Insulation materials | Resistant to high temp ,high density,formate chlorine,ethyl acetum
foam insulation materials |
| Cooling system | Air cooling/single segment compressor(-20°C) ,air and water double
segment compressor
(-40°C~-70°C) |
| Protection devices | Fuse switch, compressor overload switch, refrigerant high and low
pressure protection switch,
super humidity over-temperature protection switch, fuse, failure
warning system |
| Parts | Watching window,50mm testing hole,PL internal bulbs,partition
plate,dry and wet ball gauze |
| Controller | TEMI" South Korea"TEMI" "OYO" Japan's "OYO" Brand optional |
| Compressor | Original France"Tecumseh"brand |
| Power | 1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz
|
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
- Climatic and refrigerating chambers, cold treatment chambers;
- A variety of industrial and laboratory drying ovens;
- Testing temperature and climatic equipment;
- Muffle and chamber furnaces;
- Various equipment under the order according to the customer's
specifications.
