Programmable Spray Testing Singleton Salt Spray Chamber Touch Panel
Compound salt spray test chamber:
It breaks through the concept of the traditional salt spray test
chamber, combined with the function of alternating salt spray test,
and has experimental environments such as hot air drying, damp
heat, and salt spray.
product description:
Air supply system:
The air pressure is 1kg/cm2, which can be adjusted in two stages.
The first is the imported pressure regulating filter with the
function of filtering water.
Adjust to 2-2.5kg/ cm2 roughly, the second is the imported
precision pressure regulating valve, adjust to the pressure gauge
1kg/ cm2.
Spray method:
1. Apply bernouldt principle to take and absorb salt water and
atomize it, the atomization degree is even, without blocking
crystallization, to ensure the standard of continuous test.
2. Nozzle: made of special glass nozzle, the size and Angle of
spray can be adjusted.
3. Spray volume: adjustable 1.5± 0.5ml 80cm2/Hr (16-hour average
volume).
4. large brine storage tank, 48HR continuous spray.
Heating system:
External hot air heating method is adopted to reduce standby time
and component damage rate.
S.S.R control heating power, accurate temperature, low power
consumption.(titanium alloy corrosion prevention tube for electric
heat pipe)
Circuit control system:
1. The main controller adopts 7-inch LCD human-machine interface,
and the main screen can plan the test program.
2. The fixed time can be set 0-999 H 59 MIN.
3. The program mode can set salt spray and moisture test at the
same time
4. With power off memory device, the remaining program can be
continued when power back.
5. The rise and drop of temperature can be used for speed control
and self-calibration of temperature and humidity reference points.
6. Temperature and humidity sensor the DIN PT - 100 Ω (platinum).
| Inside box size(cm) | 60x45x40 | 90x60x50 | 120x80x50 |
| Outside box size(cm) | 107x60x118 | 141x88x128 | 190x110x140 |
| Testing room temperature | Salt test (NSS ACSS)35℃±1℃/ Corrosion Test (CASS)50℃±1℃ |
| Pressure barrel temperature | Salt test (NSS ACSS)47℃±1℃/ Corrosion Test (CASS)63℃±1℃ |
| Brine temperature | 35℃±1℃ 50℃±1℃ |
| Testing room Capacity | 108L | 270L | 480L |
| Brine tank capacity | 15L | 25L | 40L |
| Salt concentration | The concentration of sodium chloride 5% or the 5% concentration of
sodium chloride add 0.26g per liter of copper chloride (CuCl2 2H2O) |
| Air pressure | 1.00±0.01kgf/cm2 |
| Spray volume | 1.0~2.0ml/80cm2/h (working at least 16 hours, and then take the
average) |
| Testing room relative humidity | 85% above |
| PH | 6.5~7.2 3.0~3.2 |
| Spray form | Programmable spray (Including continuous and intermittent spray) |
| power | AC220V1Φ10A | AC220V1Φ15A | AC220V1Φ20A
|
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
