High Quality Fixed Frequency Sweep Vibration Testing Machine
Introduction:
Electromagnetic vibration table is widely used in automotive parts,
instrumentation, toys and other industries of product design,
research and development, manufacturing process
In order to test the actual working condition and structural
strength of the product, the collision and vibration generated in
the transportation and use of the product are simulated.The control
system adopts the color liquid crystal display with high
sensitivity, direct touch option, intuitive and simple setting of
test parameters, timely displaying the current execution program,
timely displaying the current vibration frequency, and drawing
frequency curve function.
Performance characteristics:
- Forced air cooling
- Random and sinusoidal excitation force 1:1
- Displacement peak-to-peak value up to 100mm
- The trunnion airbag has good isolation effect
- Double magnetic circuit design, low magnetic flux leakage,
uniform magnetic field
- Sinusoidal excitation force range: 1kN ~ 70kN
- Double sinusoidal impact force (three times more than 2 tons)
- Light dynamic coil, optimized design, strong vibration resistance
- The center airbag has strong carrying capacity and good low
frequency performance.
- Configurable horizontal slide
- The fan has good cooling effect and low noise
- The frequency of use can start from 1Hz
Test Standard:
ISO 2247 packaging - full - loaded transport packaging and unit
cargo - fixed low frequency vibration test
ISO 13355 packaging - all, packed transport packaging and unit load
- vertical random vibration test
IEC 60068 basic environmental test procedure
ASTM D999 test method for vibration test of shipping containers
ASTM D4728 random vibration test method for transport containers
ASTM D3580 standard for vibration test of products (vertical linear
motion)
GB/T 4857 basic test of packaging and transportation packaging
parts
GB/T 2423 environmental test for electrical and electronic products
Specification:
| Model | GSKA011-A | GSKA011-B | GSKA011-C |
| Frequency Range (Hz) | 5~400 | 5~600 | 5~3000 |
| Product load(Kg) | 50 |
| Frequency accuracy | 0.01 Hz |
| Maximum acceleration | <20g |
| Amplitude(mm) | 0.001-5 |
| Vibration mode | electromagnetic |
| Amplitude modulation mode | Electronic amplitude modulation |
| vibration direction | Vertical+Horizontal |
| vibration waveform | Sine wave |
| Test mode | Fixed frequency, sweep frequency, double frequency, program,
logarithm, random |
| Time set | 0-9999H/M/S |
| Work table size | 500×500mm |
| Power(V/Hz) | 220/50±5% |
| Rate of power(KVA) | 3.2 |
| Cooling mode | Air cooling |
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
