Stainless Steel Housing Climatic Test Chamber Programmable LCD
Touch Screen
It is intended for research and quality control of various
materials, products, components, assemblies, structures,
mechanisms, measuring instruments, etc. associated with temperature
exposure at low temperatures down to -30 ° С and positive up to +
100 ° С and humidity from 10% to 98% at certain temperatures (on
request).
It is used to simulate special operating conditions in laboratories
of radio-electronic, mechanical engineering, food, chemical,
pharmaceutical, etc. industries.
The volume of the working chamber of the PRO KTVH-30 / 100-1000 is
1000 liters (1m3).
Climatic chambers Heat-Moisture-Cold are equipped with a
refrigeration unit and a steam generator.
The operating temperature range in the chamber from -30 ° C to +
100 ° C is maintained throughout the volume.
The range of humidity maintenance is from 10% to 98%, at
temperatures from + 10 ° С to + 85 ° С.
Features
1. Thermal shork chamber in each zone for peak demand of heating
and cooling. Provides extra thermal energy to efficiently meet the
MIL-STD 883 requirements.
2. Temperature recorder provides 24 hour part temperature recording
as the load travels from zone to zone. Using touch-control graph
control as operation interface, easy to operate.
3. The system can be used for automatic Circulation Shock or manual
selective shock, capable of setting two zones or three zones shocks
as well as cold and thermal shock start-up.
4. Custom-made and optional accessories available.
| Shock Temperature ragne | -65°C~150°C |
| Heating up time | RT~200°C about 35min |
| Cooling down time | RT~-70°C about 90min |
Temp recover time/ change time | ≤5min / ≤10sec |
| Temp control accuracy/ | ±0.5°C / ±2.0°C |
| distribution accuracy |
| Inner materials | SUS 304# stainless steel plate for inner chamber,and stainless
steel plate |
| + spray painting for external chamber. |
| Insulation materials | High-temperature high-density amino acid ethyl ester foam insulator
material. |
| Systems | P.I.D+S.S.R+Microcomputer balanced temperature control system. |
| Cooling systems | Semi-hermetic two-stage compressor (water-cooled) / |
| hermetic two-stage compressor (air-cooled). |
| Safety devices | Fuse switch, high and low pressure protection switch compressors, |
| refrigerant pressure protection switch failure warning system,
electronic siren. |
| Fitting | Outlook window (special purchase), the upper and lower adjustable |
| compartment two energized measured line hole, casters,level
bracket. |
| Power | 3 phase AC380V 50HZ/60HZ |
| Controller | Tanwan TATO or TH900C |
| Compressor | Germany / Bock Brand |
How a Humidity Chamber Works
The main components of a humidity chamber are mechanisms that
introduce moisture and heat. There are a variety of methods used to
introduce moisture into the chamber, which can be in the form of a
spray or bath. The same concept applies to heat that is supplied in
the form of coils or heating elements.
In most cases, humidity chambers are designed, manufactured, and
produced to fit the setting that the customer requires. Though
there are many varieties of chambers, the basic components of heat
and moisture are necessary to create the needed humid conditions.
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
