ROHS dustproof Temperature And Humidity Controlled Chambers 3 phase
power
Optional Accessories:
1. Low humi. Dehumidifying system
2. Inner glass door with manual operating ports
3. Temp./ humi. Recorder
4. Pure water treatment device
5. Reverse osmosis water purifier
6. RS-485 interface can be linked to PC and achieve multi-level
control and recording software management.
7. LN2 / LCO2 fast cooling-down system
Overview:
High low temperature test chamber is mainly for the adaptability
test of automobile, marine electrical, electronic products, raw
devices, and other materials when stored, transported and used in
low temperature environment.
According to the national standards or user requirements, under low
temperature conditions, conduct environmental simulation tests on
the physical and other related characteristics of the product, to
judge whether the performance of the product meets the
predetermined requirements, so that it can be used for product
design, improvement, identification and factory inspection.
| Temperature Range | 0℃~150℃ |
| Humidity range | 20% R.H~98%R.H |
| Fluctuation/Uniformity | ±0.5℃/±2℃ |
| Heating rate | 1℃/min~3℃/min |
| Cooling rate | 0.7℃/min~1℃/min |
| Accuracy range | Setting accuracy: temperature 0.1℃, humidity 1% R.H, indication
accuracy: temperature 0.1℃, humidity 1% R.H |
| Sensors | Platinum resistance. PT100Ω/MV |
| Humidification system | External isolation type, all stainless steel shallow surface
evaporative humidifier |
| Dehumidification system | Using evaporator coil dew point temperature laminar flow contact
dehumidification method |
| Water supply system | Humidification water supply is automatically controlled. And can
recycle the remaining water. Save water and reduce consumption |
| Circulation System | Temperature-resistant and low-noise air-conditioning type motor.
Multi-lobe centrifugal wind turbine |
| Standard configuration | 1 set of illuminated glass window, 2 specimen holders, 1 test lead
hole (25, 50, 100mm) |
| Security Protection | Leakage, short circuit, over temperature, water shortage, motor
overheating, compressor over pressure, overload, over current
protection/controller power failure memory |
| Voltage | AC110V/AV220V/AC380V/415V±10% 50±0.5Hz Three-phase five-wire system |
| Usage Environment temp | 5℃~+30℃≤85%R.H |
Application :
Temperature adaptability test under the condition of rapid change,
or gradient for electrical, electronic, instruments and other
products or spare parts, particularly applies to environmental
stress screening test (ESS)
Environmental stress screening (ESS) refers to the process of
exposing a newly manufactured or repaired product or component
(typically electronic) to stresses such as thermal cycling and
vibration in order to force latent defects to manifest themselves
by permanent or catastrophic failure during the screening process.
The surviving population, upon completion of screening, can be
assumed to have a higher reliability than a similar unscreened
population.
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
Customer Support Services:
