Programmable Salt Spray Corrosion Test Chamber Testing Room
Capacity108L
Applications:
The salt spray test chamber is a climate simulation device that
tests the corrosion of electronic equipment, metallic material, as
well as some surface treatment--coating, galvanizing,
organic/inorganic coating, anodizing treatment, rust-proof oil
coating, etc. Performance indicators in line with requirements of
GB / T5170.8 Electrical and Electronic Products, Environmental
Testing Equipment, the Basic Parameters of the Test Method. The
salt spray corrosion test chamber according to GB / T2423.17
Electronic and Electrical Products Basic Environmental Test
Procedures Test Ka: Salt Spray Test Method for neutral salt spray
test can also be used for acetic acid salt test.
Applications:
The salt spray test chamber is a climate simulation device that
tests the corrosion of electronic equipment, metallic material, as
well as some surface treatment--coating, galvanizing,
organic/inorganic coating, anodizing treatment, rust-proof oil
coating, etc. Performance indicators in line with requirements of
GB / T5170.8 Electrical and Electronic Products, Environmental
Testing Equipment, the Basic Parameters of the Test Method. The
salt spray corrosion test chamber according to GB / T2423.17
Electronic and Electrical Products Basic Environmental Test
Procedures Test Ka: Salt Spray Test Method for neutral salt spray
test can also be used for acetic acid salt test.
Features:
1. With auto & manual water supply system, auto water supplement
when with low water level, ensure the testing continuously.
2.Temperature controller with digital control, P.I.D. Control with
accuracy of 0.1℃.
3.Double over-temperature protection, alarm when with low water
level, ensures operating safety.
4. High precise glass nozzle control the salt mist, mist spray out
uniformity through conical diffuser and free falling on the
specimen, ensure with no crystallization salt blocking.
| Inside box size(cm) | 60x45x40 | 90x60x50 | 120x80x50 |
| Outside box size(cm) | 107x60x118 | 141x88x128 | 190x110x140 |
| Testing room temperature | Salt test (NSS ACSS)35℃±1℃/ Corrosion Test (CASS)50℃±1℃ |
| Pressure barrel temperature | Salt test (NSS ACSS)47℃±1℃/ Corrosion Test (CASS)63℃±1℃ |
| Brine temperature | 35℃±1℃ 50℃±1℃ |
| Testing room Capacity | 108L | 270L | 480L |
| Brine tank capacity | 15L | 25L | 40L |
| Salt concentration | The concentration of sodium chloride 5% or the 5% concentration of
sodium chloride add 0.26g per liter of copper chloride (CuCl2 2H2O) |
| Air pressure | 1.00±0.01kgf/cm2 |
| Spray volume | 1.0~2.0ml/80cm2/h (working at least 16 hours, and then take the
average) |
| Testing room relative humidity | 85% above |
| PH | 6.5~7.2 3.0~3.2 |
| Spray form | Programmable spray (Including continuous and intermittent spray) |
| power | AC220V1Φ10A | AC220V1Φ15A | AC220V1Φ20A |
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
