0.7c-1.0c/Min Walk In Environmental Chamber Humidity AC 3 Phase
Walk-in laboratory performance and characteristics:
1, with a very wide temperature and humidity control range, can
meet the needs of users. The unique balanced temperature and
humidity control method can obtain a safe and accurate temperature
and humidity environment. With stable and balanced heating and
humidification performance, high precision, high stability of
temperature and humidity control.
2, equipped with high precision intelligent temperature regulator,
temperature and humidity by LED digital display mode. Temperature
and humidity recorder is optional.
3, automatic selection of refrigeration circuit, automatic control
device with the temperature of the set value of automatic selection
of refrigeration circuit performance, to achieve high temperature
state directly start the refrigerator, direct cooling.
4. The inner door is equipped with a large observation window,
which can facilitate the observation of the test state of the
sample.
5, equipped with advanced safety, protection device - leakage
circuit breaker, overtemperature protector, lack of phase
protector, water protector.
High and low temperature test chamber, constant temperature and
humidity laboratory, high and low temperature humidity and heat
laboratory, high and low temperature alternating humidity and heat
laboratory, salt spray corrosion laboratory, the above laboratory
can be customized according to customer requirements.
Main feature of the Walk-in environmental temperature humidity
stability chamber:
1. Programmable Controller with RS232C, 7″ LCD touch panel control
2. Stainess steel Interior, galvanized steel sheet exterior
3. 2pcs stainless steel loading shelves free
4. Multipane viewing window with heater
5. 60mm diameter feed-through port
6. Floor stand with castors
| Inner chamber size w×h×d(cm) | Non-standard,depends on customers` specific requirements for
customization |
| Exterior chamber size w×h×d(cm) |
| Testing temperature range | 0℃,-20℃,-40℃,-60℃,+70℃,+80℃ |
| Performance | Temp.fluctuation | ±0.3℃ |
| humidity range | 30~90%RH |
| Humidity uniformity | ±5℃%RH |
| Temp.uniformity | ±3℃ |
| Heat up time | 20℃~80℃≤50min |
| Material | Exterior chamber material | Cold-rolled steel+Powder coating |
| Interior chamber material | SUS#304 Stainless steel plate |
| Insulation material | PU fiberglass wool |
| System | Air circulation system | Cooling fan |
| Heating system | SUS#Stainless steel high-speed heater |
| Humidification system | Surface evaporation system |
| Controlling system | Digital electronic indicator+SSR+PID |
| Refrigeration system | Imported tecumseh compressor+ fin type evaporator+air(water)condenser |
|
| Dehumidifying system | ADP dew point dehumidification method |
| Other components | Multi-layer vacuum glass observation window,cable
port(50mm),controlling status indicator lamp,chamber
light,specimenloading shelf(2pcs,position adjustable) |
|
| Safety protection device | Over-heat protection circuit breaker,compressor overload
protection,control system overload protection,humidifying system
overload protection indicator lamp |
|
| Power supply | AC 3phase 380V 60/50Hz |
| Customization service | Non-standard or special requirements are all welcome |
Our advantages:
1) Direct factory with 10+ years manufacturing experience in test
equipment.
2) Products are in accordance with ASTM, IEC, ISO, JIS and other
international standard.
3) Overseas technical and onsite installation support, have been 8
countries, such as America, Turkey, Australia etc.
4) Professional R&D staff with more than 5 years experience in
this filed.
