High And Low Temperature Liquid Thermal Shock Test Chamber For
Laboratory
We offer standard and custom-designed environmental test chambers
to meet our customer’s requirements. with our environmental test
chambers, you can simulate a diverse range of environmental
conditions to test your products. We specialize in providing
solutions for extreme temperatures combined with humidity, altitude
or vibration.
This machine for testing functions of heat endurance,
cold-endurance, drought-endurance, wet-endurance suitable for
quality control of factories of electronics, electronics, electric
appliance, foodstuffs, automobiles, metal, chemicals plywood and
Two-box type/hanging basket type for thermal shock test chamber
etc.
Application:
For electrical, electronics and machine parts to cold test, the
temperature gradient through rapid changes in conditions or the
suitability test. Especially suitable for electrical and electronic
products, environmental stress screening options (ESS) test.
Specifications:
| Test zone size W*H*D(mm) | 200*350*300*2Bath | 260*350*450*2Bath |
| Test zone size W*H*D(mm) | 1140*1785*1240mm | 1200*1785*1320mm |
| Performance | Hot bath | Preheat temperature range | +80℃~+200℃ |
| Temperature fluctuation | ±2℃ |
| Temp.heat-up rate | Ambient temp.to+150℃ within 90min |
| Temp.pull-down rate | +150℃ to +60℃ within 60min |
| Cold bath | Precool temperature range | -65℃~0 |
| Temperature fluctuation | ±2℃ |
| Temp.heat-up rate | -65℃ to 0 within 60min |
| Temp.pull-down rate | Ambient temp.to -65℃ within 120min |
| System | Circulation system | Sirocco fan |
| Heating system | SUS#304 stainless steel high-speed heater |
| Cooling system | Imported compressor,Tecumseh compressor(or Bizer Compressor),finned
type evaporator,air(Water)-cooling condenser |
| Controller | TEMI990,8226,8227,8229 |
| Thermal shock range | -65.00℃~00.00℃/+600.00℃~150.00℃ |
| Testing time | 5min | 5min |
| Transfer time | Approximately 10 seconds |
| Temp.resolution | 0.1℃ / 1 min |
| Specimen Basket size(mm) | 100*180*200mm | 160*180*350mm |
| Specimen basket load capacity | 1C 2Kg | 1C 5kg |
| Controller | Color TFT LCD panel(6.5inch) |
| Power supply | AC 1Ψ 220V;3Ψ 380V 60/50Hz |
Service:
1. Device installation;
2. Equipment Operation Test Technology training;
3. Equipment Calibration;
4. Daily maintenance and maintenance of equipment
5 Free technical training for visiting factories
6 24-hour Online contact
7 Free software upgrades
More produced:
Temperature Humidity Test Chamber
Walk-in Aging Chamber
Environmental Test Chambers
Thermal Shock Chamber
Fast Temp. Change Test Chamber
Vibration Shaker
Environmental Vibration Chamber
Mechanical Shock Tester
UV Chamber
Xenon Chamber
