Two-Box Type Hanging Basket Type For Thermal Shock Test Chamber
Temperature And Humidity Testing Equipment
This machine for testing functions of heat endurance,
cold-endurance, drought-endurance, wet-endurance suitable for
quality control of factories of electronics, electronics, electric
appliance, foodstuffs, automobiles, metal, chemicals plywood and
Two-box type/hanging basket type for thermal shock test chamber
etc.
Thermal shock test chambers are used for “temperature shocking” a
product under test. Usually a Thermal Shock Chamber consists of two
chambers, one hot and another cold, with a test basket (which
contains the product being tested) which moves between the two
chambers (or zones) – either horizontally for vertically, depending
on the configuration of the thermal shock chamber. This equipment
is the perfect testing machine of electronic components, metal,
chemical materials, automation components, communication module,
national defense industry, aerospace industry, BGA, PCB substrate,
electronic chip IC, semiconductor ceramic and high polymer
materials.
Application:
For electrical, electronics and machine parts to cold test, the
temperature gradient through rapid changes in conditions or the
suitability test. Especially suitable for electrical and electronic
products, environmental stress screening options (ESS) test.
Specifications:
| Model | 80L | 150L | 225L | 408L | 800L | 1000L |
| Inside dimension WxHxD (cm) | 40*50*40 | 50*60*50 | 50*75*60 | 60*85*80 | 100*100*80 | 100*100*100 |
| Outside dimension WxHxD (cm) | 92*140*90 | 105*150*110 | 105*165*120 | 115*175*140 | 160*190*160 | 160*190*160 |
| Temp Range | -70°C ~~ +150°C |
| Humid Range | 20%~98%RH |
| Temp Accuracy | ±0.3°C |
| Humid Accuracy | ±2.5%RH |
| Temp Uniformity | ±1.5°C |
| Humid Uniformity | ±3%RH |
| Heating Up Speed | 3°C/min (average) |
| Heating Down Speed | 1°C/min (average) |
| Interior Material | Stainless Steel Plate (SUS304#) |
| Exterior Material | Stainless Steel Plate (SUS304#) |
| Insulation Material | Rigid polyurethane foam or glass wool |
| Refrigeration System | Hermetic Compressor |
| Protection Devices | Fuse-free switch, overloading protection switch for compressor,
high and low voltage coolant protection switch, over-humidity and
over-temperature protection switch, fuses, failure warning system |
| Control System | TEMI 880 |
| Accessories | Viewing Windows, Cable Port(dia.50mm), Chamber lamp |
| Power | 3W, AC220V or 5W AC380V |
Service:
1. Device installation;
2. Equipment Operation Test Technology training;
3. Equipment Calibration;
4. Daily maintenance and maintenance of equipment
5 Free technical training for visiting factories
6 24-hour Online contact
7 Free software upgrades
More produced:
Temperature Humidity Test Chamber
Walk-in Aging Chamber
Environmental Test Chambers
Thermal Shock Chamber
Fast Temp. Change Test Chamber
Vibration Shaker
Environmental Vibration Chamber
Mechanical Shock Tester
UV Chamber
Xenon Chamber
We offer standard and custom-designed environmental test chambers
to meet our customer’s requirements. with our environmental test
chambers, you can simulate a diverse range of environmental
conditions to test your products. We specialize in providing
solutions for extreme temperatures combined with humidity, altitude
or vibration.
